Type 12 Rivet Machine

Type 12 Rivet Machine

Type 12

The Stimpson Type 12 electric powered rivet setting machine was designed to auto feed and set rivets. The Stimpson Type 12 is the heavy duty version of the smaller Stimpson C1 Rivet Machine. The machine is capable of running rivets with lengths from 7/32 inch to 9/16 inch. The all cast iron and tool settle design insures long life and trouble free operation. The machine has a fixed arm and has a throat depth of 10 ¼ inches. The Type 12 will drive and set the rivet thru your material in one machine cycle. Like all auto feed rivet machines, the Stimpson Type 12 machine is capable of setting one diameter rivet only. The machine will however set different length rivets of the same diameter.

Size Capacity

  • CE-100 (1/8 inch diameter) and CE-125 (9/64 inch diameter) rivets


  • A heavy duty machine capable of setting rivets in thick leather. The 10 ¼ inch throat depth allows rivet placement in very wide material.


  • Lubrication with 30wt motor oil before use is recommended

Optional Equipment

  • Hands Free electronic ring guard safety devise or palm button actuation are available
  • Work plate with back and side gauges for rivet placement
  • Laser locating light
  • Work light to illuminate setting area
  • Optional bottom cap die for a finished look on both sides


  • Dimensions: 20 inches deep, 29 inches wide, 62 inch overall height
  • Weight: 300 pounds
  • Electrical requirement: 110 volt single phase (standard wall outlet)
  • Pneumatic requirement: none
  • Motor Size: 1/2 horsepower
  • Throat Depth: 10 1/4 inches
  • Used and Rebuilt models available only
Downloadable Flyers Downloadable Manual Videos